Fiber Cement Tile Roofing in Martinsburg, WV
Fiber cement and composite tile roofing installed by Jade Roofing & Construction in Martinsburg, WV. The look of slate or clay tile at a fraction of the weight, for homes across the Eastern Panhandle, Hagerstown, Frederick, and Franklin County, PA.
Tile Looks, Lighter Roof
Fiber cement roofing tiles are made from cement reinforced with cellulose or synthetic fibers, pressed into slate, shake, or flat-tile profiles. They weigh about half what concrete tile does, will not burn, will not rot, and are not attractive to insects or moss. For homeowners in Berkeley, Washington, and Frederick Counties who want the tile or slate look on a house that was framed for asphalt, fiber cement is one of the two practical routes, alongside polymer composite tile from Brava and DaVinci.
We install fiber cement and composite tile as a full system: high-temperature self-adhered underlayment across the deck, manufacturer-specified fastening, profile-matched metal flashing at valleys and walls, and mechanically fastened ridge and hip pieces. Most fiber cement tile carries a 30- to 50-year manufacturer warranty, and the composite options carry 50 years.
Both give you the tile look without the weight. Fiber cement is stiffer and heavier, with a more mineral feel; polymer composite (Brava, DaVinci) is lighter, more impact-resistant, and better in hard freeze-thaw. We carry samples of both and will recommend one based on your roof pitch, framing, and the finish you want.
Installed for Freeze-Thaw and Wind
Any tile-profile roof in the Panhandle has to handle water freezing in the laps. We use tiles rated for northern climates, set the headlap for our rain and snow, and keep the underlayment continuous so a cracked tile in year 20 is a cosmetic problem, not a leak. Ridges and hips are fastened, not just bedded, so wind off the mountains does not lift them. Where the tile calls for battens, they are raised and drained.
Before quoting we check the framing. Fiber cement is lighter than clay but heavier than asphalt, and some truss roofs need a look before they take it. If yours does, we tell you and quote a composite tile instead. Jade Roofing & Construction is based in Martinsburg, GAF Certified Plus, a licensed Maryland Home Improvement contractor (MHIC #167279), BBB Accredited, and rated 5.0 across 44 Google reviews. Inspections and written estimates are free.
Why Jade for Fiber Cement Tile
A lighter tile roof is still a tile roof. Here is what we bring to it.
Climate-Rated Products
Only tiles rated for freeze-thaw, with the headlap and underlayment our winters call for. We will not put a warm-climate product on a Panhandle roof.
The System Under the Tile
Self-adhered high-temp underlayment, drained battens where required, and profile-matched flashing. It is what keeps the house dry for the next 40 years.
Honest Framing Check
We confirm your roof can carry the product before we sell it to you, and quote a lighter composite if it cannot.
Common questions about fiber cement tile roofing
What is fiber cement roofing tile?
A roofing tile made of Portland cement reinforced with fibers, molded into slate, shake, or flat-tile shapes. It is non-combustible, rot-proof, and about half the weight of concrete tile, which is why it is used on homes that want the tile look without a structural upgrade.
How does fiber cement compare to Brava or DaVinci composite tile?
Fiber cement is heavier and stiffer with a mineral finish. Polymer composite is lighter, more impact-resistant, and generally better in hard freeze-thaw. Both look like tile or slate from the street. We install both and recommend based on your roof and climate exposure.
How long does fiber cement tile last?
Manufacturer warranties commonly run 30 to 50 years. Because the underlayment does most of the waterproofing, the life of the roof depends heavily on installing the right underlayment, which is why we use a high-temperature self-adhered membrane on every tile roof.
Will my roof support fiber cement tile?
Most stick-framed homes can. Some truss roofs and older homes need a check first. We look at the framing during the free inspection and, if there is any doubt, recommend a lighter composite tile rather than guess.
Is fiber cement tile fireproof?
Fiber cement is non-combustible and typically carries a Class A fire rating as part of a rated assembly. That can matter for insurance and for homes near wooded lots in places like Hedgesville or Thurmont.
Brands We Work With
Jade Roofing & Construction is a GAF Certified Plus contractor, an Owens Corning Platinum Preferred Contractor, and a James Hardie Alliance Select Contractor. We install manufacturer-approved systems from GAF, Owens Corning, CertainTeed, DaVinci Roofscapes, Brava Tile, James Hardie, LP SmartSide, ProVia, Alside, and VELUX.
